Programming and Relearning

Cruise Control System (CCS), Activating / Deactivating

NOTE:
- Vehicles equipped with CCS, the CCS function must be activated after replacement of the engine control module.
- If the CCS function is activated in the engine control module of a vehicle without CCS, a DTC memory entry is made. If this is the case, the CCS function must be deactivated.

Procedure
- Connect vehicle diagnostic, testing and information system VAS5051 and select vehicle system "01 - Engine electronics". Connecting VAS 5051 Scan Tool
Ignition must be switched on.

Display on VAS5051:







Vehicles with control module No. 8E0909 ...

- Under -1- select diagnostic function "11 - Coding II".

All models:

Display on VAS5051:







1 - Enter code word

Activate CCS:
- Enter "11463" in zone -2- and confirm entry by pressing -Q- button.

Deactivate CCS:
- Enter "16167" in zone -2- and confirm entry by pressing -Q- button.
- Exit function "11 - Login, or function 11 - Coding II" by pressing <- button.

Display on VAS5051:







- Under -1- select diagnostic function "08 - Read measured value block".

Display on VAS5051:







1 - Enter display group
- Enter "066" for "display group number 066" in zone -2- and confirm entry by pressing -Q- button.

Display on VAS5051:







- Check indication in display field -2-.

Display Group 066:

- Exit function "08 - Read measured value block" by pressing <- button.
- Press "06 - Exit output".
- Switch ignition off.