Shift Cable, CVT

CVT 01J
Selector lever cable and interlock cable, exploded view

Notes:
^ Do not bend or kink the selector lever cable.
^ Before installing, lubricate the cable eye and ball socket with a thin coating of polycarbamide grease, part no. G 052 142 A2.





1. 23 Nm
2. Selector lever cable
- do not bend or kink, lightly grease cable eyelet and ball socket before installing
- if rubber boots are damaged the selector lever cable must be replaced
- do not install rubber boot transmission side turned wrong way
3. Lock nuts 12 Nm
4. Sleeve
- For selector lever cable
- Insert in bottom section of shift mechanism cover
5. Clip
6. Ignition/starter - switch
- With ignition key removal lock
7. Interlock cable
- For ignition key removal lock
- Must not be kinked
8. 9 Nm
9. Clamping bolt- 13 Nm
- For selector lever cable
- To adjust, slacken off by approximately 1 revolution (do not unscrew completely)
10. Locking clamp
- for selector lever cable
11. Securing plate
- for selector lever cable
12. Support bracket
- For selector lever cable
13. 23 Nm
14. Holder
- For selector lever cable