Drive Chain, Tensioner, For Oil Pump, Removing and Installing

Drive chain or chain tensioner for oil pump, removing and installing

Removing
- Remove oil pan (upper part).
- Remove front sealing flange.





- Unscrew bolts -4- and remove chain tensioner -3- from front sealing flange -1-.
- Remove chain from drive chain gear.

Installing





- Replace O-ring -2-.
- Bolt in chain tensioner-3- with bolts -4- (with washers) to front sealing flange -1-.





- Unscrew locking bolt from adjustment hole -3-.
- Press chain tensioner-1- in direction of arrow until a drill bit => 3 mm -2 can be slid into the alignment hole of sealing flange and chain tensioner.
- Install front sealing flange.
- Install oil pan (upper part).

Component Tightening Torques (Part 6 Of 17):

Tightening torque