Characteristics of Air Conditioner Versions

Characteristics that are visible with air conditioner installed
- Remove dust and pollen filter. Service and Repair


Intake housing and fresh air blower in version 1




Air duct -A- can be seen through the fresh air intake opening.


Intake housing and fresh air blower in version 2




No air duct is present.
- Remove glove box.

Air duct in version 1





Air duct in version 2




- The air duct is designed to be smaller in area -A- than the duct in version 1.
- Bracket -B- extends out more than in version 1.


Characteristics that are also visible with the instrument panel shell removed

Air distributor housing in version 1




- The air is directed to the spacer for defroster duct through two openings-A-.
- The air flaps -B- close fully at the same time.
- Flaps -A-, -B- and -C- are made of sheet steel.


Air distributor housing in version 2




- The air is supplied to the spacer for the defroster duct through one opening-A-.
- Flaps -C- remain open slightly when the center flap -B- is closed (angle between the flaps is approximately 40 °C).
- Flaps -A-, -B- and -C- are made of plastic.