Differential: Service and Repair

Transmission installed, 5 Speed Automatic 01V





Note:
- General repair notes
- Rules of cleanliness for working on automatic transmission

1. Double seal
^ Between final drive and transmission housing
2. Shim
^ Behind bearing ring
3. Bearing ring
4. O-ring
^ Always replace
5. Plug -30 Nm (22 ft. lbs.)
6. Bolt 25 Nm (18 ft. lbs.)
7. Right flange shaft
8. Seal
^ For right flange shaft
9. Bolt 23 Nm (17 ft. lbs.)
10. Differential - cover
11. Shim
^ Behind bearing ring
12. Bearing ring
13. O-ring
14. Differential
15. Bolt 23 Nm (17 ft. lbs.)
^ Note tightening order
16. Housing cover
^ Illustration shows front wheel drive version
17. Dowel sleeve
18. Gasket
19. Roll pin
20. Selector lever
^ For shift rod
21. Seal
^ For selector lever
22. Bolt 23 Nm (17 ft. lbs.)
23. Seal
^ For left flange shaft
24. Magnet ring
^ For Speedometer Vehicle Speed Sensor -G22
25. Left flange shaft
26. Mounting bracket for left flange shaft
27. Ball bearing for left flange shaft
28. Circlip
29. O-ring for left flange shaft
^ Square cross section
^ To replace, remove left flange shaft and install