Camshaft Adjustment Control, Checking

Camshaft adjustment control, checking

- Connect vehicle diagnostic, testing and information system VAS5051 or VAG1551 scan tool and select engine electronics control module by entering address word "01. When doing this the engine must be idling. Refer to "Scan Tool Testing/Scan Tool Connecting and Initial Checks/Connecting VAS5051 or VAG1551" Testing and Inspection

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -4- to select function "Basic setting" and confirm entry by pressing -Q- button.


Indicated on display


Basic Setting
Input display group number XXX


- Press buttons -0-, -9- and -4- to select "Display Group 094" and confirm entry with -Q- button.


Indicated on display


Basic Setting 94 ->
1 2 3 4







- Check specified display value for camshaft timing control.
- Increase engine speed to approx.: 2000 RPM until "CS-ctrl. ON" appears in display field 2







NOTE:
- Maintain engine speed until "Syst.OK" appears in display fields 3 and 4.







If the specified value is not obtained in display fields 3 and 4, test solenoid valves for camshaft adjustment. Testing and Inspection