Electric Headrest Adjustment, Removing and Installing

Electric Headrest Adjustment, Removing And Installing







1 - Electric headrest adjustment
- Remove back rest.
- Remove upholstery from rear seatback.
- Disengage lumbar cover.
- Disconnect harness connector - 9 -.
- Remove nuts - 12 -.
- Remove nuts - 7 -.
2 - Shaft
3 - Relay carrier
- Slide upward to unclip.
4 - Bolts
- 3x
- Tightening torque: 2 Nm
5 - Washers
- 3x







6 - Rubber buffer
- 3x
7 - Nut
- 3x
- Tightening torque: 2 Nm
8 - E - motor, headrest adjustment
- Belongs to headrest adjustment delivery casing
9 - Harness connector
10 - Nut
- 2x
- Tightening torque: 3.5 Nm
11 - Rubber buffer
- 2x
12 - Nut
- 2x
- Tightening torque: 3.5 Nm