Mirror Lens, Removing and Installing

Mirror Lens, Removing And Installing

Special Tools And Equipment







- 80-200 pry lever - RMV outside mirror

Removing
- Unglue mirror housing.







- Using 80-200 pry lever - RMV outside mirror or a thin plastic tool, carefully pry out lens at bottom first, then at top.
- Disconnect harness connectors.

Installing

CAUTION: Safety gloves must be worn when installing the mirror lens.

- Attach harness connectors.







- Friction finger on mirror lens - 2 - must also be inserted into friction spring in housing - 1 - during installation.
- Press on mirror lens.

NOTE: Press only on center of lens.