Engine: Specifications

Engine Data (Part 1 Of 4):

Engine Data (Part 2 Of 4):

Engine Data (Part 3 Of 4):

Engine Data (Part 4 Of 4):

Engine/transmission attaching points (illustration shows transmission flange), Note: Centering sleeves (A and B) / (Part 1 Of 2):

Engine/transmission attaching points (illustration shows transmission flange), Note: Centering sleeves (A and B) / (Part 2 Of 2):

Tightening Torques (Part 1 Of 18):

Tightening Torques (Part 2 Of 18):

Tightening Torques (Part 3 Of 18):

Tightening Torques (Part 4 Of 18):

Tightening Torques (Part 5 Of 18):

Tightening Torques (Part 6 Of 18):

Tightening Torques (Part 7 Of 18):

Tightening Torques (Part 8 Of 18):

Tightening Torques (Part 9 Of 18):

Tightening Torques (Part 10 Of 18):

Tightening Torques (Part 11 Of 18):

Tightening Torques (Part 12 Of 18):

Tightening Torques (Part 13 Of 18):

Tightening Torques (Part 14 Of 18):

Tightening Torques (Part 15 Of 18):

Tightening Torques (Part 16 Of 18):

Tightening Torques (Part 17 Of 18):

Tightening Torques (Part 18 Of 18):

Cylinder Head Tightening Torque and Sequence; Refer to Cylinder Head Service and Repair, Service and Repair

Camshaft Bearing Cap, Tightening Torque and Sequence; Refer to Camshaft, Engine, Service and Repair, Service and Repair

Flywheel Tightening Torque
Dual-Mass Flywheel To Crankshaft Turn 60 Nm + 1/2 turn (180°) (44 ft. lbs. + 1/2 turn (180°))
Pressure Plate To Dual-Mass Flywheel 20 Nm (15 ft. lbs.)

Note: Always replace dual-mass flywheel mounting bolts.