Glove Box Lamp: Service and Repair

Glove Box Light, Removing and Installing


NOTE: To replace the light bulb, remove the glove box light.


Removing







- Using a small standard screwdriver, release tab -1- for the glove compartment light -2- and remove.
- Disconnect harness connectors -3-.
- Remove the light bulb of the glove box light -2- from the socket.

Installing
- First reconnect the electrical harness connectors -3-.
- Insert the glove box light -2- with both locks -4- from below through the large opening (arrows) and lock the opposite side -1-.