Tail Light In Side Panel, Removing and Installing

Tail Light In Side Panel, Removing and Installing

Removing
- Open storage shelf in luggage compartment on relevant side.
- Open tail light cover and remove.
- Remove luggage compartment trim on appropriate side.







- Turn knob -2- at bulb carrier -1- counter clockwise and remove.
- Remove four hex nuts (4x, size in mm: 8) -3- and remove tail light -4- from vehicle on outside.

Installing


NOTE: When installing, be sure that seal between chassis and tail light housing seals properly.


- Install in reverse order of removal
- Before tightening mounting nuts, align tail light to contours of chassis (uniform gap dimensions).