Transmission

TRANSMISSION

- Do not run the engine and do not tow the car if the oil pan is removed or does not contain ATF.

- If the automatic transmission is replaced, check the ATF in the planetary gear and the gear oil in the final drive and top up, if necessary.

- Before installing the transmission, check the installed dimension of the torque converter.

- When installing the transmission, ensure that the dowel sleeves are correctly located.

- When the transmission is removed, protect the torque converter from dropping out.

- Thoroughly clean connection points and the surrounding area before disconnecting.

- Place removed parts on a clean surface and cover. Use sheeting and paper. Do not use fluffy cloths!

- Carefully cover or seal open parts if repairs are not performed immediately.

- Install only clean parts; do not remove replacement parts from their wrapping until just before installing.

- Pay attention to the rules for cleanliness when performing work on the automatic transmission.