Output Diagnostic Test Mode (DTM) (Function 03)

Output Diagnostic Test Mode


NOTE:
- Output Diagnostic Test Mode is only possible when vehicle is stationary and engine is not running!
- If a malfunction is detected during output Diagnostic Test Mode (DTM), possibly Find and repair malfunction cause.


In the function "output Diagnostic Test Mode (DTM)" functions of the system are checked.

Initiating output Diagnostic Test Mode:
- Switch on ignition
- Switch radio on
- Press buttons -0- and -3-. This selects "output Diagnostic Test Mode (DTM)", function 3.

Indicated on display


Rapid data transfer Q
03 - Output Diagnostic Test Mode


- Press -Q- button to confirm input.

Indicated on display


Output Diagnostic Test Mode ->
Radio louder


The radio volume is increased audibly..
- Press -> button.

Indicated on display


Output Diagnostic Test Mode ->
Radio quieter


The radio volume is decreased audibly.
- Press -> button.

Indicated on display


Output Diagnostic Test Mode ->
Radio station search upward


The next station will be searched and displayed in combination center display.
- Press -> button.

Indicated on display


Output Diagnostic Test Mode ->
Search mode radio station downward


The previous station will be adjusted again and will be displayed in combination center display.
- Press -> button.

Indicated on display


Output Diagnostic Test Mode ->
Station buttons forward


Station buttons will be switched through in forward motion.
- Press -> button.

Indicated on display


Output Diagnostic Test Mode ->
Station buttons backward


Station buttons will be switched through in backward motion.
- Press -> button.

Indicated on display


Output Diagnostic Test Mode ->
End


- Press -> button.
- The tester returns to the "Select function" mode.

Indicated on display


Rapid data transfer HELP
Select function XX