Cooling System Components (on Body), Removing and Installing

Cooling system components (on body), removing and installing

Notes:
- Parts of cooling system on engine. Cooling System Components ( Engine, Front) Cooling System Components ( Engine, Rear)
- Diagram of coolant hose connections. [1][2]Cooling System
- Draining and filing with coolant. Cooling System, Draining and Filling
- Coolant mixture ratios. Cooling System, Draining and Filling




1. Radiator
- Removing and installing, Service and Repair
- After replacing, renew coolant in complete system
2. Securing clip
3. Securing rubber
4. O-ring
- Replace if damaged
5. Bottom coolant hose
- Secured to radiator with retaining clip
- Check for secure seating
- Diagram of coolant hose connections [1][2]Cooling System
6. Rubber washer
7. Retaining bolt
8. Nut
- Tightening torque: 10 Nm
9. Fan ring
- Clipped into air ducting and secured with retaining bolt -Item 7-
10. 2-pin connector
11. Radiator fan (-V7)
- Checking, Testing and Inspection
12. Connector
- Black, 3-pin
- For radiator fan thermoswitch
13. Radiator fan - thermoswitch (-F18), 35 Nm
- For electric fan
Switching temperatures: Stage 1
- on: 92...97°C
- off: 84...91°C
Switching temperatures: Stage 2
- on: 99...105°C
- off: 91...98°C
14. Seal
- Always replace
15. Drain screw
- Tightening torque: 10 Nm
16. Top coolant hose
- Secured to radiator with retaining clip
- Check for secure seating
- Diagram of coolant hose connections [1][2]Cooling System
17. Bolt
- Tightening torque: 5 Nm
18. Mounting rod
19. Guard plate
20. Bolt
- Tightening torque: 5 Nm
21. Bolt
- Tightening torque: 5 Nm
22. Radiator
- Removing and installing, Service and Repair
- After replacing, replace coolant in complete system
23. Nut
- Tightening torque: 5 Nm
24. Bracket
25. Fan ring
26. Pressurizing fan
27. Bolt
- Tightening torque: 5 Nm