Operation CHARM: Car repair manuals for everyone.

Cylinder Head Assembly: Specifications


Bolts M6 10 Nm
Bolts M8 20 Nm
Camshaft bearing caps and camshaft adjuster 10 Nm
Exhaust manifold to cylinder head 25 Nm
Front exhaust pipe to exhaust manifold 25 Nm
Oxygen sensor 50 Nm
Spark plugs 25 Nm
Toothed belt sprocket to camshaft 55 Nm
Intake manifold to cylinder head 10 Nm
Cylinder head cover 10 Nm

"For information regarding" Cylinder Head Tightening Torque and
Sequence
, Refer to Cylinder Head, Service and Repair Service and Repair

"For information regarding" Camshaft Bearing Cap Tightening Torque and Sequence, Refer to Camshaft, Service and Repair Service and Repair

Cylinder head, reworking
- Reworking the cylinder head (skimming) is only permissible down to a minimum dimension of a = 139.25 mm.