Erase DTC Memory (Scan Tool Function 05)

Erase DTC Memory (Scan Tool Function 05)

NOTE:
- The function status register will be reset when DTC memory is erased.
- If DTC memory cannot be erased, check DTC memory again and repair malfunction.

Requirements
- DTC memory checked Check DTC Memory (Scan Tool Function 02)
- All malfunctions repaired

After successful DTC memory check:

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5-. This selects "Erase DTC Memory", function 05.

Indicated on display

Rapid data transfer Q
05 Erase DTC Memory

- Confirm input using the -Q- button.

Indicated on display

Rapid data transfer ->
DTC Memory is erased!

DTC memory is erased.

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

NOTE:
- This message indicates an error in the test sequence.
- This message indicates an error in the test sequence.
- Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.