On Board Diagnostic (OBD) Functions

On Board Diagnostic (OBD) Functions

A list of On Board Diagnostic functions can be printed out by pressing the HELP button.

The following functions are available:


List of functions
01 - Check Control Module Versions
02 - Check DTC Memory Check DTC Memory (Function 02)
03 - Output Diagnostic Test Mode [1][2]Output Diagnostic Test Mode (DTM) (Function 03)
04 - Basic Setting [1][2]Basic Setting (Function 04)
05 - Erase DTC Memory Erase DTC Memory (Function 05)
06 - End Output [1][2]End Output (Function 06)
07 - Code Control Module
08 - Read Measuring Value Block [1][2]Measuring Value Blocks (Function 08)

Only the functions listed above can be used for the "AC/Heating Electronics" OBD program.

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX