Part 1
Adaptation (Scan Tool Function 10)
Individual functions are called up by entering the appropriate adaptation channel numbers (listed in the adaptation table).
NOTE:
- Using measuring value blocks 10, 11, 12 and 15, the values that need to be transferred to the new instrument cluster can be read out before replacement.
- Adaptation channels 42, 43, and 44 (see measuring value blocks 013 and 014) must be adapted according to the oil quality (measuring value block 15). Read Measuring Value Block (Scan Tool Function 08)
- Adaptation channels 60, 61, and 62 are only needed when the instrument cluster communicates with the corresponding BUS system..
- Measuring value blocks 125 and 126 Read Measuring Value Block (Scan Tool Function 08)and indicate the components that are part of the powertrain data-BUS.
- Measuring value block 130 Read Measuring Value Block (Scan Tool Function 08)indicates the components that are part of the comfort system data-BUS.
- Measuring value block 140 Read Measuring Value Block (Scan Tool Function 08) indicates the components that are part of the information data-BUS.
Adaptation table
Initiating "Adaptation" function 10
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0-. This selects "Adaptation" function 10.
- Press -Q- button to confirm input.
Indicated on display
Read Measuring Value Block Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation Q
Insert channel number XX
- Enter desired adaptation channel (adaptation table).
- Press -Q- button to confirm input.
NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another adaptation channel.
Resetting SRI after service
Indicated on display
Rapid data transfer HELP
Select function XX
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Input channel number XX
- Press buttons -0- and -2-.
- Press -Q- button to confirm input.
NOTE:
- The Service Reminder Indicator (SRI) is used to remind the driver when a service is necessary. Indication is in center display.
- Service reminder appears 1 month or 1200 miles before service limit is reached. Resolution is 100 miles. Example for display: After a total driving distance of 7000 miles, "SERVICE IN 1000 miles" is indicated.
- The remaining distance to service can be checked via the menu in center display by pressing the clock set button once.
- When a service event arrives, the text information appears in the center display for 5 seconds when ignition is switched on. It is shown after the note for automatic transmission and a target input for navigation (if applicable). Display: "SERVICE".
- The currently valid specifications can be found in the "Maintenance" book.
- Data version of instrument cluster.
- Channels 40, 41, and 46, which display the dynamic values of the service event are set to "0" automatically.
Indicated on display: Service event is displayed
Channel 2 Adaptation 1 ->
< - 1 3- >
1 - means service is active, this means that "SERVICE!" is displayed in the instrument cluster.
- Press -> button.
Indicated on display:
Channel 2 Adaptation 1
Input adaptation value XXXXX
Service event is reset using the following adaptation values:
Adaptation value Service event
00000 Reset
- Using the keypad enter the appropriate adaptation value (00000) to erase the service.
- Press -0- button five times.
Indicated on display:
Channel 2 Adaptation 1 Q
Input adaptation value 00000
- Press -Q- button to confirm input
Indicated on display
Channel 2 Adaptation 0 Q
< - 1 3- >
0 - means service is reset, meaning that "SERVICE in 8000 mi (Marelli instrument cluster) or 8100 mi (VDO instrument cluster)" is displayed in instrument cluster after confirming with Q button.
NOTE: The display of 8000 or 8100 miles is the starting value for the service display.
- Press -Q- button to confirm input.
Indicated on display:
Channel 2 Adaptation 0 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display:
Channel 2 Adaptation 0 ->
Store changed value?
- Press the -> button to complete the reset of the SRI.
Adaptation of fuel consumption display
Indicated on display
Rapid data transfer HELP
Insert address word XX
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Rapid data transfer HELP
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Input channel number XX
- Press buttons -0- and -3-.
- Press -Q- button to confirm input
NOTE:
- Adaptation only for vehicles with on board computer.
- Value entered must be between 85% and 115%.
- Value must be entered in steps of 5%.
- If the value "100" was changed due to a customer complaint, the changed value must be transferred when replacing instrument cluster.
Indicated on display
Channel 3 Adaptation 100 ->
Consumption display < - 1 3- >
- Press -> button.
NOTE: Correction of fuel consumption display is only possible via direct input.
Indicated on display
Channel 3 Adaptation 100
Input adaptation value XXXXX
- Input desired correction value using scan tool keypad, filling initial positions with "0".
Example:
Desired input value: 90%
Keyboard entry: 00090
Indicated on display
Channel 3 Adaptation 100 Q
Input adaptation value 00090
- Press -Q- button to confirm input
Indicated on display
Channel 3 Adaptation 100 Q
Input adaptation value 00090
- Press -Q- button to confirm input
Indicated on display
Channel 3 Adaptation 90 Q
Consumption display < - 1 3- >
- Press -Q- button to confirm input.
Indicated on display
Channel 3 Adaptation 90 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 3 Adaptation 90 ->
Changed value is stored
- Conclude adaptation of the fuel consumption display by pressing the -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
-
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
NOTE: If input is incorrect, tester switches to function mode.
Indicated on display
Function is unknown or " cannot be carried out at the
moment
- Press -> button.
- Select "Adaptation" function 10 again and select adaptation channel 03.
- Perform correction of fuel gauge again..
Language version of driver information display
Indicated on display
Rapid data transfer HELP
Select function XX
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Input channel number XX
- Press buttons -0- and -4-.
- Press -Q- button to confirm input
Indicated on display
Channel 4 Adaptation 1 ->
< -1 3- >
NOTE:
- Display indicates only the last digit of the five digit language version code, for example, 1 for German.
- If incorrect value is input "Adaptation" function is terminated and "Adaptation" function 10 must be initiated again..
- Code can now be entered using the scan tool keypad in steps or via direct input.
Code Language
00001 German
00002 English
00003 French
00004 Italian
00005 Spanish
00006 Portuguese
Input in steps:
- Code can be decreased using button 1 and increased using button 3, for example, to 2 for language version English.
Indicated on display
Channel 4 Adaptation 2 Q
< -1 3- >
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 2 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 2 ->
Changed value is stored
- Conclude adaptation of language version by pressing the button.
Direct input:
Indicated on display
Channel 4 Adaptation 1 ->
< -1 3-
- Press -> button.
Indicated on display
Channel 4 Adaptation 1
Input adaptation value XXXXX
- Input desired 5-digit code Enter using keypad.
Example:
Code: 2 (English)
Input value: 00002
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 1 Q
Input adaptation value 00002
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 2 Q
< -1 3- >
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 2 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 4 Adaptation 2 ->
Changed value is stored
- Conclude adaptation of language version by pressing the button.
Odometer display
This function is used to adapt the odometer after the instrument cluster is replaced.
NOTE:
- The adaptation is only possible for an instrument cluster with a maximum mileage of 100 miles.
- Adaptation can only be performed once for each instrument cluster.
- Only larger adaptation values can be entered (more than 100 miles).
- If an incorrect value is entered and confirmed, it cannot be changed. If this happens, the instrument cluster must be replaced.
- In countries where speedometers are calibrated in miles, adaptation can be performed in miles.
- Observe notes when replacing instrument cluster.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and 1-. This selects "Login Procedure" function 11.
Indicated on display
Rapid data transfer Q
11 - Login-Procedure
- Press -Q- button to confirm input.
Indicated on display
Login-Procedure
Input code number XXXXX
- Input code number 13861.
Indicated on display
Login-Procedure Q
Input code number 13861
- Press -Q- button to confirm input.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0-.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Input channel number XX
- Press buttons -0- and -9-.
- Press -Q- button to confirm input.
Indicated on display
Channel 9 Adaptation 0 ->
Mileage in 10 miles < - 1 3- >
NOTE: For the VAG1551 scan tool values can only be input via direct input.
- Press the -> button to continue program sequence.
Indicated on display:
Channel 9 Adaptation 0 Q
Input adaptation value XXXXX
- Input adaptation value (measuring value block 10 Read Measuring Value Block (Scan Tool Function 08)) via the keypad.
Example:
Mileage = 89627
0 8 9 6 3
Indicated on display
Channel 9 Adaptation 0 Q
Input adaptation value 08963
- Press -Q- button to confirm input.
Indicated on display
Channel 9 Adaptation 8963 Q
Mileage in 10 miles < - 1 3- >
- Press -Q- button to confirm input.
Indicated on display
Channel 9 Adaptation 8963 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 9 Adaptation 8963 ->
Changed value is stored
- End adaptation of odometer by pressing the button.
Adaptation of auxiliary heater
Indicated on display
Rapid data transfer HELP
Select function XX
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Input channel number XX
- Press buttons -1- and -8-.
- Press -Q- button to confirm input.
- Indicated on display: Adaptation value is displayed, for example 0.
NOTE:
- Adaptation value "0" is input if auxiliary heater is not installed.
- Adaptation value "1" is input if an auxiliary heater is installed that is independent of engine condition (running or not).
- Adaptation value "10" is input if an auxiliary heater is installed that switches off when engine is not running.
- Press -> button.
Indicated on display
Channel 18 Adaptation 0
Input adaptation value XXXXX
- Input adaptation value using keypad, filling initial positions with "0", for example 00001.
Indicated on display
Channel 18 Adaptation 0 Q
Input adaptation value 00001
- Press -Q- button to confirm input.
Indicated on display
Channel 18 Adaptation 1 Q
< - 1 3- >
- Press -Q- button to confirm input.
Indicated on display
Channel 18 Adaptation 1 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 18 Adaptation 1 ->
Changed value is stored
- End adaptation of the auxiliary heater by pressing the -> button.
Adaptation of fuel gauge sender resistance range
This function is used to adjust the fuel gauge sender resistance range if the fuel gauge display in the instrument cluster does not match the actual amount of fuel in the tank.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation Q
Insert channel number XX
- Press buttons -3- and -0-.
- Press -Q- button to confirm input.
Indicated on display: Adaptation value is displayed, for example 128.
Channel 30 Adaptation 128 ->
Tank sender < - 1 3- >
NOTE:
- "128" is the adaptation value for the standard resistance range for the fuel gauge sender as set by the factory..
- The resistance value for the fuel gauge sender resistance range can be adjusted by ± 8 Ohm to give an adaptation value between 120 and 136.
- If the value "128" was changed due to a customer complaint, the changed value must be transferred when replacing instrument cluster.
- Press -> button.
Indicated on display
Channel 30 Adaptation 128
Input adaptation value XXXXX
- Input desired correction value using scan tool keypad, filling initial positions with "0" and watch how the display responds.
Example:
Desired input value: 132
Keypad input: 00132
Indicated on display
Channel 30 Adaptation 128 Q
Input adaptation value 00132
- Press -Q- button to confirm input.
Indicated on display
Channel 30 Adaptation 132 Q
Tank sender < - 1 3- >
- Press -Q- button to confirm input.
Indicated on display
Channel 30 Adaptation 132 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 30 Adaptation 132 ->
Changed value is stored
- End adaptation of the fuel gauge sender resistance range by pressing the -> button.