With Sunroof Switch

Front Reading/interior Lights, Removing And Installing

Front reading/interior lights with sunroof switch


NOTE:
- To replace the bulb, pry off the lens.
- Bulb for interior light -7-: 72 V, 70 W
- Bulb for reading lights -6-: 12 V, 5 W


Removing

- Carefully pry off lens -1- using flat screwdriver.
- Remove both Phillips-head screws -2-.







- Pry out hooks at -B- using screwdriver and then remove interior/reading light with sunroof switch -3- from roof.
- Disconnect both harness connectors -4- and -5-.

Installing

- Connect harness connectors -4- and -5.
- Insert interior/reading lights with sunroof switch -3- at -A-, and clip it in on opposite side at -B-.
- Secure with Phillips-head screws -2- and reinstall lens -1-.