Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2002 >> S4 Quattro Sedan (8D2) V6-2.7L Turbo (APB) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair >> Multi-Function Transmission Range (TR) Switch -F125-, Removing and Installing

Multi-Function Transmission Range (TR) Switch -F125-, Removing and Installing



Multi-Function Transmission Range (TR) Switch -F125-, removing and installing - 5 Spd. Automatic Transmission 01V

Removing

- Remove left transmission support.
- Unbolt Multi-Function Transmission Range (TR) Switch -F125- from transmission and pull off from shift rod.

Installing





- Connect Multi-Function Transmission Range (TR) Switch -F125- on shift rod. Flap part at splines in switch -3- must align with flat part of shift rod -1-.

Note:
Set Multi-Function Transmission Range (TR) Switch -F125- onto shift rod in centered manner. Do not cant and do not set with force. Risk of damage at switch terminals.





- Rotate switch until the alignment hole -4- at switch housing can be fitted on the alignment pin -2- at transmission housing.
- Installing left transmission support.

Tightening torques





pro multis · About Operation CHARM