Output Diagnostic Test Mode (DTM) (Scan Tool Function 03)

Output Diagnostic Test Mode (DTM) (scan tool function 03) - 5 Spd. Automatic Transmission 01V

Note:
There are two different transmissions:

^ Transmission with hydraulic controls -E17-, on which the transmission input speed sensor (inductive sensor) is secured to the underside of the valve body.
^ Transmission with hydraulic regulation -E18/2-, on which the transmission input speed sensor (camshaft position sensor) is secured behind the valve body at the transmission housing.

For information on which transmission is installed, refer to tables from the following:

Output Diagnostic Test Mode (DTM) for transmission with hydraulic regulation -E17-
Output Diagnostic Test Mode (DTM) for transmission with hydraulic regulation -E18/2-