Read Measuring Value Block (Scan Tool Function 08) For Transmissions With Hydraulic Control -E17-
Read Measuring Value Block (scan tool function 08) for transmissions with hydraulic control -E17- - 5 Spd. Automatic Transmission 01V
Note:
For transmissions with hydraulic control -EI812-, "Read Measuring Value Block"
WARNING:
To avoid accidents during measuring and test drives, observe safety precautions
Procedure
- Connect VAS 5051 tester or V.A.G 1551 Scan Tool (ST) and select Transmission Control Module (TCM) using "address word" 02. Ignition must remain switched on.
Rapid data transfer HELP
Select function XX
Indicated on display
- Press PRINT button to turn on ST printer. Indicator lamp in button must light up.
- Press buttons -0- and -8- to select "Read Measuring Value Block" and press -Q- button to confirm input.
read measuring value block Q
Enter display group number XXX
When indicated on display:
- Enter desired display group number, display group overview.
- Press Q button to confirm input.
Read measuring value block 1 ->
1 2 3 4
Indicated on display (example) for display group 001:
Note:
^ Explanation of values in the individual display fields.
^ Display can be printed out when printer is switched on.
^ To switch to a different display group, proceed as follows-.
- If specified values are obtained in all display fields, press -> button.
Rapid data transfer HELP
Select function XX
Indicated on display (function selection):
Overview of selectable display group numbers for transmission with hydraulic control -E17-
Display Group Number 001-003:
Display Group Number 004-006:
1) Only for vehicles with CAN-bus.
2) Only for vehicles without CAN-bus.
Display Group Number 007-009:
1) Only for vehicles with CAN-bus.
2) Only for vehicles without CAN-bus.
Display Group Number 009-011:
2) Only for vehicles without CAN-bus
Note:
^ When the printer is switched on, the contents of the display will be printed out on the scan tool log.
^ If specified values are not obtained in all display fields:
- Press -> button.
Rapid data transfer HELP
Select function XX
Indicated on display