Gear Set, Adjusting and Marking

Gear set, adjusting and marking - 5 Spd. Automatic Transmission 01V

1 - Identification "0937" means the Oerlikon gear set with a ratio of 37:9.
2 - Pairing number (312) of gear set.
3 - Dimension "r" is based on the master gauge used on the test bench during production. Dimension "r" is always given in 1/100 mm. Example: "25" means r = 0.25 mm

Ro - Length of test machine master gauge used "Ro".

Ro - ring gear = 57.50 mm

R - Actual dimension between ring gear axis and face of drive pinion in position of quietest running for this gear set R = Ro + r

Vo - Hypoid offset