Gear Sets, Adjusting and Marking
Gear sets, adjusting and marking - 6 Spd. Manual Transmission 01E
1 - Identification "0937" signifies Oerlikon gear set with a ratio of 37:9.
2 - Pairing number (312) of final drive set.
3 - Deviation (tolerance) "r" is based on the test machine master gauge used in the production. The deviation "r" is always given in 1/100 mm. Example: "25" signifies r = 0.25 mm
Ro - Length of master gauge used on test machine Ro = 59.65 mm
R - Actual distance between ring gear axis and face of drive pinion at point with quietest running for this gear set R = Ro + r
Vo - Hypoid offset