Differential, Removing and Installing

Differential, removing and installing - 6 Spd. Manual Transmission 01E

Note:
Removing and installing is also possible with transmission installed in vehicle.





1 - Bolt, 10 Nm + 1/4 turn (90°) further
2 - Drive flange

^ When removing, secure with a drift to prevent it turning

3 - Bolt, 25 Nm

^ Qty. 10

4 - Cover for final drive

^ If replaced: adjust ring gear

5 - Oil filler plug, 40 Nm

^ Checking oil level in transmission

6 - Differential

^ If replaced: adjust ring gear

7 - Transmission housing