Tail Light In Rear Lid, Removing and Installing

Tail Light In Rear Lid, Removing and Installing

Removing
- Open carpet trim in rear lid on appropriate side.







- Turn individual bulb sockets -1-, -2-, -3- counter clockwise and remove.


NOTE: Illustration depicts the left tail light in the rear lid. Rear lid lock must also be removed for right rear lid tail light.


- Remove the four mounting nuts and remove housing.
- Remove four mounting nuts (size in mm: 8) (arrows) and remove housing.

Installing


NOTE: When installing, be sure that the seal between chassis and tail light housing seals properly.


- Install in reverse order of removal
- Before tightening mounting nuts, align tail light to contours of chassis (uniform gap dimensions).