With Manufacturer Scan Tool

Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

NOTE:
- If DTC memory cannot be erased, Check DTC Memory again and repair malfunction.
- DTCs are not updated after erasing DTC memory until after ignition has been switched on and off.

Requirements
- DTC memory checked.
- All malfunctions repaired.

Procedure
After successful DTC memory check:






Display on VAS 5051:

- In selection -1 -, click on the diagnostic function "05 - Check DTC Memory".







Display on VAS 5051:

1 - no indication (before erasing)

or

- DTC memory erased

NOTE: If indication -1- appears in display field: "DTC memory has not yet been checked", the work sequence was not adhered to correctly. DTC memory can only be erased if DTC memory was checked before.

2 - Note: Perform the function?Note: Data is being erased !

- Press on "OK"-button in display -2-.
- End function "05 - Erase DTC Memory" by pressing on <- button.