SID: Minimum Distance, Adaptation

SID: Minimum Distance, Adaptation

This function stipulates a minimum distance for the SID.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -1- and -0- and confirm input with -Q- button.

Indicated on display:

Rapid data transfer Q
10 -Adaptation

- Press-Q- button to confirm input.

Indicated on display:

Adaptation
Enter channel no. XX

- Press buttons -4- and -2- to access "channel 42".
- Press-Q- button to confirm input.

Indicated on display: Display shows minimum distance until next service (here, e.g. 15 = 15000 km).

Channel 42 Adaptation 15
min-value, oil in 1000 km < -1 3- >

NOTE:
- Confirm maintenance intervals applicable to vehicle.
- Distance must be entered in steps of 1000 km. Accordingly, readout on the display will also be in steps of 1000 km.
- When using the button pad on the scan tool, the number must be entered directly.
- If an incorrect value is entered adaptation function will be terminated and must be restarted.

CAUTION:
- Replacement instrument clusters calibrated in miles require input of distance reading in miles during adaptation (DO NOT convert to kilometers).
- Replacement instrument clusters calibrated in kilometers require input of distance reading in kilometers during adaptation.

- Press -> button.

Indicated on display:

Channel 42 Adaptation 15
Enter adaptation value XXXXX

- Enter required value via scan tool button pad, filling in initial spaces with "0"

Specification: 15000 km

Entry via keypad: 00015

Indicated on display (example only):

Channel 42 Adaptation 15 Q
Enter adaptation value 00015

- Press-Q- button to confirm input.

Indicated on display:

Channel 42 Adaptation 15 Q
min-value, oil in 1000 km < -1 3- >

- Press-Q- button to confirm input.

Indicated on display:

Channel 42 Adaptation 15 Q
Store changed value?

- Press-Q- button to confirm input.

Indicated on display:

Channel 42 Adaptation 15 ->
Changed value is stored

- Press -> button to terminate adaptation of minimum distance.