Interlock or Cruise Control Switch, Removing and Installing

Interlock or cruise control switch, removing and installing
Removing





- Remove lower cover on driver's side.
- Remove connector-1- from interlock switch.
- Turn switch -2- in direction of arrow 9Oc to the left and remove switch.
Cruise control switch -3- is removed in the same manner.

Installing
Installation is carried out in the reverse sequence. When doing this, note the following:
- Grease cam head of cruise control or interlock switch with poly resin grease Part No. G052 142A2.
- Cruise control switch must be installed in upper assembly opening.