Front Seat, Assembly Overview

Front Seat, Assembly Overview

NOTE: Before disconnecting the battery: obtain the radio code.







1 - Front seat
- Removing
- Remove front seat rail covers.
- Remove rear seat rail covers.
- Move front seat - 1 - up and back as far as possible.
- Remove front bolts - 2 - (2x).
- Move seat forward.
- Remove rear bolts - 2 - (2x).

CAUTION: Before removing seat: Disconnect battery Ground (GND) strap

- Tilt front seat - 1 - back.
- Disconnect connectors.
- Connect airbag adapter.
- Installing
- Installation is in reverse order of removal.
2 - Bolts (4x)
- Tightening torque 40 Nm