Side Trim on Tunnel Side, Removing and Installing

Side Trim On Tunnel Side, Removing And Installing







1 - Backrest
2 - Bolts (4x)
3 - Backrest adjuster
4 - Plastic rivet (2x)
5 - Seat height adjuster
6 - Side trim, sill panel side
7 - Connector (3x)
8 - Seat pan
9 - Side trim, tunnel side
- Removing
- Remove seat.
- Attach fixture for seat repair VAS 6136 to engine and transmission holder VAS 6095.
- Attach front seat to fixture for seat repair VAS 6136.
- Apply screwdriver to head of plastic rivet - 10 -.
- Twist screwdriver and pry out plastic rivet - 10 -.
- Release second plastic rivet - 10 -.
- Remove side trim on tunnel side -9 -.
- Installing
- Install side trim on tunnel side - 9 - in reverse order of removal.
10 - Plastic rivet (2x)
- Always replace