Instrument Cluster / Carrier: Service and Repair

Instrument Cluster, Removing And Installing

Special tools and equipment







- Special hook for front end 3370

Removing


NOTE: Do not disassemble instrument cluster.


- Determining input values when replacing instrument cluster:
Do this using vehicle diagnostic, testing and information system VAS 5051.

- Pull steering wheel with adjusting mechanism fully out and move it downward.







- Remove lower cover at instrument cluster to rear using 3370 special hook.
- Disengage upper cover at instrument cluster.







- Remove bolts -arrows-.







- Remove instrument cluster to rear using 3370 special hook.







- Unclip securing bracket of connectors -arrow- and disconnect connectors.

Installing
Installation is reverse of removal, paying attention to the following:
- After installation, perform a function test of the instrument cluster.
- If the function test is OK, enter the input values for the instrument cluster:
Do this using vehicle diagnostic, testing and information system VAS 5051.