Turn Signals: Service and Repair

Side Mounted Turn Signals, Removing And Installing


CAUTION!
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows.


NOTE: See Battery, Disconnecting and Connecting procedure for the steps after reconnecting voltage supply.


Removing
- Switch ignition off and remove ignition key.







- Push side turn signal light against retaining tab -arrow- in driving direction and carefully remove from opening.
- Remove housing for side turn signals from bulb socket.

Installing
Installation is the reverse of removal.