Multi-Function Transmission Range (TR) Switch -F125-, Removing and Installing

Multi-Function Transmission Range (TR) Switch -F125-, removing and installing
Removing
- Removing left transmission support.
- Unbolt Multi-Function Transmission Range (TR) Switch -F125- from transmission and pull off from shift rod.

Installing





- Connect Multi-Function Transmission Range (TR) Switch -F125- to shift rod. Flap part at splines in switch -3- must align with flat part of shift rod -1

Note: Set Multi-Function Transmission Range (TR) Switch -F125- onto shift rod in centered manner Do not cant and do not set with force. Risk of damage at switch terminals.





- Rotate switch until the alignment bore -4- at switch housing can be fitted on the alignment pin -2- at transmission housing.
- Installing left transmission support .





Tightening torques