With Manufacturer's Scan Tool

Diagnostic Trouble Code (DTC) Memory, Checking

- Connect vehicle diagnostic, testing and information system VAS 5051 and select vehicle system "01 - Engine electronics" in selection. Engine should be idling. Connecting VAS 5051 Scan Tool

NOTE: If the engine will not start, crank it for at least 5 seconds with the starter and then always leave the ignition on.

Display on VAS 5051:







- Under -1- select diagnostic function "02 - Check Diagnostic Trouble Code (DTC) memory".

Display on VAS 5051:







1 - Content of the Diagnostic Trouble Code (DTC) memory:
- 0 Faults recognized
or
- X Faults recognized

2 - DTCs
- DTC code
- DTC location
- DTC type

A - If malfunctions were recognized:
- Print out screen content or self-diagnosis report.
- Exit function "02 - Check Diagnostic Trouble Code (DTC) memory" by pressing <- button.

Display on VAS 5051:







- Repair malfunction(s) as specified in DTC table. Testing and Inspection
- Reselect diagnostic function "02 - Check Diagnostic Trouble Code (DTC) memory" and erase DTC memory.
- Select diagnostic function "06 - End output" in selection. Ending Output (Function 06)

B - If no malfunction was recognized:
- Select diagnostic function "06 - End output" in selection. Ending Output (Function 06)