Side Window, Removing and Installing

Side window, removing and installing

Removing
- Remove rear window regulator.







- Mark position of side window - 3 - to window regulator - 7 -.







- Remove nuts - 8 -.
- Remove side window - 3 - together with angle bracket - 1 -, spacers - 2 - and washers - 6 -.

Installing







- Place spacer - 2 - as shown on angle bracket pins - 1 - and insert pre-assembled side window - 3 - in window regulator - 4 -.
- Press window - 5 - onto pins from rear side and tighten nut.







- Coat new side window seal - 2 - with lubricant (e.g. soap solution).
- Insert upper seal in retaining strip - 1 - and pull it down.
- Seal must be flush with retaining strip at top.

Further installation is performed in the reverse order of removal.