Front Door: Service and Repair

Door, removing and installing







NOTE:
- For various assembly work, the entire door can be completely raise from the door hinges after electrical connectors on lower A-pillar have been disconnected.
- Adjustments must not be made after installation.

- Pull bellows down from A-pillar.
- Disconnect electrical connectors on bottom of A-pillar.
- Loosen bolt - 1 - on upper door hinge - 2 -.
- Remove lower bolt - 4 - on bottom door hinge - 3 -.
- Raise door with a second technician.

Installation is reverse of removal.