Trunk / Liftgate Latch: Service and Repair

Rear lid lock and handle mechanism, removing and installing







1 - Rear lid lock
- To remove, unclip operating rod from swiveling bush and disengage.
2 - Swiveling bush
- After installing rear lid lock, engage operating rod and secure.
3 - Nut
- 8 Nm
4 - Operating rod
5 - Release
6 - Lock cylinder
- Removing:
- Disconnect electrical connectors.
- Disengage release from lock cylinder.
- Remove bolt.
- Twist lock cylinder 90 degrees.
- Remove lock cylinder from handle mechanism.
7 - Screw 8 Nm
8 - Motor
- Country versions
9 - Handle
- Removing:
- Remove rear lid trim.
- Remove lock cylinder.
- Remove bolts.
- Press in catches - arrows -.
- Remove grip piece.
10 - Nut
- 8 Nm