Window Shaft Strips, Removing and Installing

Window shaft strips, removing and installing

Special tools, testers and auxiliary items required







- Trim removal wedge 3409

Removing







- Using Trim Removal Wedge 3409 - 1 -, press upper edge of rubber strip - 2 - down until it slides over upper edge of window shaft strip - 3 -.
- Pull Trim Removal Wedge 3409 along strip - arrow - in this position.
- Remove strip.

Installing

NOTE:
- Only use Cleaning Solution D 009 401 04 as an installation aid.
- If other lubricants are used, the trim may fall off due to vibrations.

- Engage at top and lightly press down-rail slides over rubber
- Engage top of trim - 3 -.
- With flat hand, press trim down until rubber - 5 - slides over lower edge - 4 -.
- Pull with hand in this position over complete trim.