Rear Seat Bench, Assembly Overview

Rear Seat Bench, Assembly Overview







1 - Rear seat bench
- Removing
- Pull rear seat bench - 1 - up and remove rear seat bench - 1 -.
- With seat heating: Detach connector for seat heating.
- Installing
- Place protective cover - 4 - below buckles - 3 - (2x).
- Install piping at buckle cover
- With seat heating: Connect connector for seat heating.
- Push rear seat bench - 1 - under rear seat backrest - 2 - and feed in buckles - 3 - (2x).
- Engage rear seat bench - 1 - in grommets - 5 - (3x).
2 - Rear seat backrest
3 - Buckles (2x)
4 - Protective cover
5 - Grommets (3x)