Diagram 32/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Ignition/Starter Switch, Headlamp Range Control Module, Fuse





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

C - Generator (GEN)

D - Ignition/Starter Switch

E1 - Light Switch

J285 - Instrument Cluster Control Module with display unit Common Modules Overview

J431 - Headlamp Range Control Module Common Modules Overview

S10 - Fuse (on fuse/relay panel)

S20 - Fuse (on fuse/relay panel)

S21 - Fuse (on fuse/relay panel)

T2 - Double Connector, black, right engine compartment

T10 - 10-Pin Connector, black, connector station electronics box plenum chamber

T32a - 32-Pin Connector, green, on instrument cluster

(43) - Ground Connection (on right lower A-pillar) Locations

(238) - Ground Connection 1 (in passenger compartment wiring harness)

(501) - Threaded Connection 2, terminal 30 (on relay panel)

(A2) - Plus Connection (15) (in instrument panel wiring harness)

(A17) - Connection (61) (in instrument panel wiring harness)

(A32) - Plus Connection (30) (in instrument panel wiring harness)

(A51) - Connection (56) (in instrument panel wiring harness)

* - Lowline

** - Highline

Next Diagram 32/3 (Tracks 15-28)