Raising Vehicle (Suspension Versions 1 BA, 1 Be, 1BV, 1BR)

Raising vehicle (suspension versions 1 BA, 1 BE, 1BV, 1BR)
When performing the next operation, it must be ensured that the wheels remain in contact with the turntables while raising the vehicle.

Should contact be lost, the turntables are not to be moved, as this would bias the measurement result.
- Position axle lift at front jacking points and raise vehicle.

Note: Vehicle is raised by 60 mm.





- Extend cylinders in spindles and fix in position with locking pins.
Make sure locking pins -arrows- are correctly positioned.
- Lower vehicle onto spacer gauge VAG 1925.