Diagram 8/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Igniter for side airbag, driver's side and passenger side, Crash sensor for side airbag, driver's side and passenger side





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G179 - Crash sensor for side airbag, driver's side Locations

G180 - Crash sensor for side airbag, passenger side Locations

J220 - Motronic Engine Control Module (ECM) Common Modules Overview

J234 - Airbag Control Module Common Modules Overview

J393 - Comfort System Central Control Module Convenience Systems Overview

J526 - Telephone/Telematics Control Module Locations

N199 - Igniter for side airbag, driver's side Airbag System Overview

N200 - Igniter for side airbag, passenger side Airbag System Overview

T3c - 3-Pin Connector, yellow, passenger compartment: near driver's Seat Connector Station

T3d - 3-Pin Connector, yellow, passenger compartment: near passenger's Seat Connector Station

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber Connector Station

T46 - 46-Pin Connector, black, on Telephone/Telematic Control Module

(109) - Ground Connection, in airbag wiring harness

(312) - Ground Connection 2 (in Airbag wiring harness)

(A125) - Connection (crash signal) in instrument panel wiring harness

- Short circuit bridge becomes effective when connector is unplugged

* - Where applicable

Previous Diagram 8/4 (Tracks 29-42)

Next Diagram 8/6 (Tracks 57-70)