Installing Rear Window

Installing Rear Window

- After preparatory work has been performed, apply the adhesive.







- Position complete surface of nozzle - 2 - onto window.
- - Arrow - indicates direction of application.

NOTE: Cross-section thickness of adhesive bead - 1 - is determined by dimension of opening in nozzle tip and rate of application.







- Apply adhesive sealing material all around, as shown in illustration.
- Note varying spacing dimensions to window edge.
- Using two double suction cups, install rear window in window opening.

CAUTION: Window must be installed within 15 minutes, otherwise bonding properties of adhesive will be impaired.

- Align windshield at sides.
- Spacing between edge of window and roof frame must be 6.5 mm.
- Observe curing time.