Four-Way Lumbar Support, Removing and Installing

Four-way Lumbar Support, Removing And Installing

Special tools, testers and auxiliary items required







- Engine and transmission holder VAS 6095







- Fixture for seat repair VAS 6136







1 - Hook
2 - Four-way lumbar support release
3 - four-way lumbar support

- Removal:
- Remove seat.
- Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
- Attach the front seat to the fixture for seat repair VAS 6136.
- Remove backrest cover panel.
- Disengage bracket - 6 - at bottom on left and right sides from backrest frame - 7 -.
- Disengage four-way lumbar support - 3 - at top on left and right sides from brackets - 9 - (Qty. 2).
- Disengage release for four-way lumbar adjustment-8-at hook - 1 -.
- Disengage four-way lumbar support height adjustment release - 2 - at retaining pin - 4 - and at idler pulley - 5 -.
- Remove four-way lumbar support - 3 -.

- Installing:
Installation is reverse of removal.
4 - Retaining pins
5 - Idler pulley
6 - Support
7 - Backrest frame
8 - Four-way lumbar support height adjuster release
9 - Retainers (2x)