Diagram 9/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Control module with indicator unit in instrument panel insert, Oil Pressure Switch, Oil Level Thermal Sensor, Fuel Pump (FP), Fuel Level Sensor 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil Pressure Switch Locations

G - Sender for fuel gauge Locations

G6 - Fuel Pump (FP) Locations

G169 - Fuel Level Sensor 2 Locations

G266 - Oil Level Thermal Sensor Locations

J285 - Control module with indicator unit in instrument panel insert

K2 - Generator (GEN) Warning Light

T10 - 10-Pin Connector, black, connector station E-box, plenum chamber

T10a - 10-Pin Connector, brown, connector station E-box, plenum chamber

T32 - 32-Pin Connector, blue, on instrument panel insert

T32a - 32-Pin Connector, green, on instrument panel insert

(83) - Ground connection -1-, in right front wiring harness

(249) - Ground connection -2-, in wiring harness interior

(269) - Ground connection (sensor Ground) -1-, in instrument panel wiring harness

(A17) - Wire connection (61), in instrument panel wiring harness

(A74) - Connector (15a, fuse 5), in instrument panel wiring harness

* - quattro only

Previous Diagram 9/15 (Tracks 183-196)