Wheel Bearing Housing (All Wheel Drive), Servicing

Wheel bearing housing (all wheel drive), servicing





1. Wheel bearing housing
2. Wheel bearing
^ Stepped ID
^ Installation position: Large ID of wheel bearing faces wheel hub
^ Pressing out - Go to Fig. 2
^ Pressing in - Go to Fig. 3
3. Splash plate
4. Wheel hub
^ Stepped design
^ Pressing out - Go to Fig. 1
^ Pressing in - Go to Fig. 4
^ Light construction wheel hub, Refer to Wheel Hub, Service and Repair
5. TORX bolt, 10 Nm
6. Rubber bushing





Fig. 1 Pressing out wheel hub

Note: Wheel bearing housing must lie against milled surface bolt holes.





Fig. 2 Pressing wheel bearing out of wheel bearing housing
Note: Wheel bearing housing must lie against milled surface of bolt holes.





Fig. 3 Pressing wheel bearing into wheel bearing housing
Stepped wheel bearing

Note: Large ID of wheel bearing faces wheel hub.

- Press home wheel bearing -A-.





Fig. 4 Pressing wheel hub into wheel bearing
- Install wheel hub -B- and press home over inner race of wheel bearing.

Note: Tubular section VW 415 A must press against center of bearing inner race.