Diagram 9/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module, Brake Booster Pressure Sensor, Secondary Air Injection (AIR) Pump Motor, Brake System Vacuum Pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G294 - Brake Booster Pressure Sensor Brake System Vacuum Pump Assembly Overview

J220 - Motronic Engine Control Module (ECM)

J299 - Secondary Air Injection (AIR) Pump Relay Locations

J569 - Brake Booster Relay

S130 - Fuse for secondary air pump

T10 - 10-Pin Connector, black, connector station E-box, plenum chamber

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

V101 - Secondary Air Injection (AIR) Pump Motor Locations

V192 - Brake System Vacuum Pump Brake System Vacuum Pump Assembly Overview

(12) - Ground connection, in engine compartment, left Component Locations Overview in engine Compartment

(83) - Ground connection -1-, in right front wiring harness

(220) - Ground connection (sensor Ground), in engine wiring harness

(316) - Ground connection (sensor Ground -2-), in engine wiring harness

* - Automatic transmission (multitronic 01J or AG5) only

Previous Diagram 9/11 (Tracks 127-140)

Next Diagram 9/13 (Tracks 155-168)