Light Bulb For High Beam (Xenon) Headlights, Replacing

Light Bulb For High Beam (High Intensity Gas Discharge (Xenon) Headlights), Replacing

Removing
Left headlight:







- If installed, detach cover -1- in left of engine compartment.







- Remove connectors -1- and -2- from holder.
- Unclip holder for connector and pull off upwards -arrow-.

Right headlight:







- If installed, detach cover -1- in right of engine compartment.







- Remove bolts -arrows-.
- Disengage evaporative emission (EVAP) canister purge regulator valve -N80- -1- on air duct.
- Remove air duct -2-.

Continuation for both sides:
- Detach cover for main beam from headlight housing.







- Unplug connector -3- at main beam bulb.
- Disengage wire clip -2- and take bulb -1- out of housing.

Installing
Install in reverse order, paying attention to the following:
- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.
- Secure bulb with spring clip.
- Re-attach connector and close housing cover.
- Secure housing cover with spring clip.