Rear Door Window Glass: Service and Repair

Window Regulator And Door Window, Separating







1 - Window frame

- Removing:
- Remove door trim.
- Window frame removed together with window regulator from door.
- Door window - 4 - removed.
- To remove, unscrew countersunk screw - 7 - and remove window regulator from window frame.

- Installation:
- When installing, make sure that guide rail, arrow - A -, runs parallel to guide arrow - B -
- Tighten bolts - 7 - to 6 Nm.

2 - Triangular panel
- Before removing, disassemble window frame and window regulator.
- Unscrew bolt - 3 - and remove panel sideways.
3 - Countersunk screw
- 5 Nm
4 - Window

- Removing:
- Drive down door window fully.
- Unscrew bolts - 5 - and remove door windows from window regulator.

- Installation:
- Insert window into window regulator.
- Screw bolts - 5 - into window regulator, but do not tighten yet.
- Drive door window upward into window frame.
- Pull door window toward front into window guide on window frame at B-pillar and tighten bolts - 5 - to 4 Nm.

5 - Socket head bolt
- 4 Nm(- 0.5 Nm)
6 - Window regulator
- Window frame removed together with window regulator from door.
- Door window removed.
- To remove, unscrew countersunk screw - 7 - and remove window regulator from window frame.